Skip to toolbar
Idoneth Deepkin Slow Build

Idoneth Deepkin Slow Build

Supported by (Turn Off)

Project Blog by wyrdhunter Cult of Games Member

Recommendations: 59

About the Project

My goal is to build an Idoneth Deepkin force for Age of Sigmar. The process will take some time due primarily to the cost of the models involved, to be honest.

This Project is Cancelled

Back to (Objective) Base Work and Another Setback

Tutoring 4
Skill 3
Idea 5
No Comments

The Advil wasn’t cutting it from the pain from my Wisdom Teeth extraction so I had to switch to the hard stuff and was out of it for several days. Downside, it looks like the nerve was bruised due to proximity to the extracted tooth. But head mostly cleared up I pushed on.

I decided put my chest on a piece of cork to make it stand out from the sandy paste and water. I mocked up a piece with some aquarium plants I also plan to add.

Back to (Objective) Base Work and Another Setback

I shaped off several pieces of cork and used a chest to make sure it fit on it. I find that using a set of needle nose pliers give a good random breakage pattern, better than doing it by hand.

Back to (Objective) Base Work and Another Setback

I wanted some texture on the cork but not anything as coarse as the sandy paste will be so I used some Vallejo Brown Earth. It has a much finer grit to it. I used it just on the top of the cork after gluing them down to the bases.

I decided on using 50mm bases. 50mm are the size of objective in Warmachine and since AoS just measure from the center of the objective it wouldn’t matter much either. Making it 50mm though does break it down to easier math for AoS since it’s 1″ from the center to the edge of the base so you’d need to be within 2″ of the edge to claim it.

Proxie Models makes some nice flat bases. I ordered a bunch of them from Amazon a while back.